Intelligent Controllers
The PW-Series Modular Control System is an
advanced access control hardware architecture capable of providing solutions for
large enterprise applications. The Intelligent Controller (PW6K1IC or PW3K1IC)
provides power and flexibility with its 32-bit architecture, TCP/IP support,
flash memory, large local cardholder database, and large reader and I/O module
support.
The Intelligent Controller is designed to operate off-line, making access
control decisions independently from a PC or other controlling device. It can
also be connected to a host computer for system configuration, alarm monitoring
and direct control. Connectivity to the host computer is accomplished via direct
serial communication (RS232 or RS485), dial-up modem, or TCP/IP network
connection. The PW-6000 has Ethernet directly embedded and will support a second
Ethernet connection.
The PW6K1IC Intelligent Controller supports any combination of up to 32 I/O
or reader boards (16 for the PW3K1IC) to monitor alarm input points, relay
output points and access control reader interfaces. By offering a modular
design, the system can be tailored to meet a wide range of applications, while
optimizing cost and mounting space.
The PW-6000 will support up to 300,000 cards and 50,000 transactions. The
standard Intelligent Controller accommodates a card database of 7,800 cards and
a standard transaction buffer of 5,000 transactions.
The PW-Series access modules have been designed to accommodate various
mounting options. Units can be wall mounted in a high density configuration
(PW5K2ENC1) when space is limited, a 19" rack configuration (PW5K2ENC2), or in a
tile mount configuration (PW5K1ENC3). The PW-6000 controller utilizes a built-in
Web server to configure the hardware attributes of the
controller. Features
- Up to 12 intervals per time zone where each interval is a start time, stop
time and day map. The day map indicates the day of the week or holiday
- 255 possible holidays are defined by a starting date and duration
- Automatic calculation of leap year and Daylight Saving Time
- 9-digit (32-bit) user ID standard / 15-digit maximum
- Support for FIPS long card numbers
- Activation and deactivation dates by card
- Up to 32 access levels per card or individual time zones per readers
- Up to 8-digit Personal Identification Numbers (PIN)
- Operating modes include locked, unlocked, facility code, card only, card
and PIN, card or PIN, and PIN only
- Strike modes include fail-safe and fail-secure
- Up to eight card formats per reader
- Entire card bit-stream reported with invalid facility code or invalid card
format
- Anti-passback support – free pass and exempt flags, last area accessed,
last reader accessed and time/date of last access
- Configurable as standard, entry delay latching, entry delay non-latching
and exit delay
- Configurable as standard (energize to activate) or fail-safe (de-energize
to activate)
- Pulse control: single pulse (up to 24 hours) or repeating pulses (on/off
in 0.1 second increments, up to 255 times)
- Any combination of 32 I/O or reader modules may be connected to the
PW6K1IC RS485 ports. 4,000 feet / 1,250 meters total bus length per port (a
max 16 I/O or reader board may connect to the PW3K1IC)
- UL294, UL1076 Listed
- AES FIPS 197 Encryption
- PW-6000 Web server for hardware configuration
|
